Best 3D Printer for 28mm Miniatures

Best 3D Printer for 28mm Miniatures
Best 3D Printer for 28mm Miniatures

Creating any model or prototype is being so easy nowadays by means of a 3D printer. You can create anything small or big by printing that model for your work. But for getting the best performance you need to have the best 3D printer for 28mm miniatures that will create your model perfectly with details and as well will serve you with the best performance.

A 3D printer is eventually a complex machine that you need to look for some factors to choose the best one. Again, all the printers are not for every kind of works. So, for your assistance, here we discussed the key factor of a 3D printer and give a compact review of some of the best products. This might help you to buy.

How 3D Printer Works?

The 3D printer is one of the wonder technologies of this era. You can print anything as you want with this printer. So, eventually, there will arise a question on your mind how it works?

3D printing main concept is a fabrication. It needs a special filament in most cases that are special plastics. The machine pushes the plastic into a nozzle and heated it. Then it laid the heated plastic on a bed layer by layer.

You need to input the 3D design file into the printer or with help of a computer the printer decides the position of every layer. some motors, belt, and bearings make the movement of the nozzle. By X and Y axis movement and also up and down motion, it can print anything on the bed.

How 3D Printing Works

Factors to consider before buying

Buying a printer is not the only solution for your work. You need to buy the best one and also according to your need. But to choose the best one you need to consider some facts that make them different from others. Here are some points for you

XY Precision

XY precision indicates the sharpness and accuracy of the printing. It is the head movement of the nozzle in the X and Y directions, not up and down. The accuracy depends on the quality of the bearings, motors, belts and how rigid the frame of the printer is.

The metal construction printers are normally the best XY precision printers as they are stable and can make every movement accurately. They are vibration proof too that any uneven forces can’t make any hamper to the printing.

Layer Thickness

A 3D printer prints a model layer by layer. layer thickness is the height of the heated plastic material that is laid down on the plate to create the 3D model. The less the thickness is, the more the sharpness and details will increase. But you should also consider that excessive thickness will cause in un-stability of the model while printing and also slow progress.

It is said that to print an accurate miniature, 100 microns (0.1mm) or less layer thickness 3D printer will be ideal. You can also change it according to your work and need. But you should ensure that the printer will make enough detail on your work.

Miniature Size

There are different 3D printers for different uses. You need to buy according to the type of your work. Like if you want to print 3D gaming miniatures of 28mm or 58mm, then you will need an FFF printer. Again, you want to print something smaller than this, then you will need to have a Resin 3D printer. It uses liquid resin to print the smaller models.

The 3D printer can be used to print big things like a house or castles you will need a big and expensive printer. So, for buying your working criteria is important. You cannot print everything by a single 3D printer. So first know your work and then take the decision.


Normally 3D printers allow only some specific plastic material. So before buying a 3D printer, you must know which type of material is needed for that particular one. You should go for that printer that is used with the best quality plastic and also the availability of that the plastic.

Normally most of the printers use ABS, PLA+, or PLA plastic. They are good with some cons. Good plastic will ensure you the best quality and sharpness of the printing. It will also increase the durability of the model.

Movement and Nozzle Diameter

The hole from where the heated plastic came from to create your model is the nozzle. Nozzle diameter controls the amount of material that will lay down to create the layer, the lower diameter means less material at a time and vice versa.

Excessive nozzle diameter will increase the layer thickness and put much material at a time. Best practice is to choose a printer which has a nozzle diameter, not above 0.4mm. Again, if the nozzle diameter is too small, then it will reduce the printing speed and slows down the whole process.

Best 3D Printer for 28mm Miniatures

Buying the best 3D Printer is always a challenging and important task for your work. All manufacturers try to improve their product. But you should buy that one which can meet your needs as well as will give you the best performance. Here, we wrote a full review of some of the best printers that may full fill your criteria. Let’s have a look.

1. Dremel DigiLab 3D45 3D Printer

Dremel DigiLab 3D45 3D Printer is surrounded by glass and metal body that is heavily heat resistant and strong enough that will protect your creation and as well as the machinery from dust and other problematic elements from the outside environment. It will also prevent from being heating up and heat exchange and also will protect this machine from any uneven forces.

It has a full-color touchscreen to set up and operate the printer easily. You can control every process by using the screen. The printer has Wi-Fi connectivity that means you can control it from anywhere through the internet.

There are also a built-in HD camera and a remote printing software are included to the printer to print and monitor your prints as well as to see the progress from any place. It has also a USB port, by which you can print from local resources by just giving the file via USB.

Dremel DigiLab 3D45 3D Printer

The printer has 2 filters built in to ensure you better prints and safety and it also reduces the chance of warping. To detect the inserted filament type and to track it, there is a built-in RFID. It can also change the printer settings to make the best combination.

The problem you may face in this printer is that there is no nozzle cleaner so that you have to manually clean it by a tweezer. Loading new filament to the printer is a bit fiddly that may hamper you. After printing, you need to clean the plate because of the uneven glue on the plate.

2. The XYZprinting Da Vinci Jr. 3D Printer

Da Vinci Jr. 3D printer is made by XYZ printing. Being fully enclosed printer, it is capable of printing and PLA. It can boast the printing area in a big scale despite having a small build platform.

It is least expensive comparing with other printers. It is easy to set up and use. It doesn’t require manual calibration. In this printer you can easily print things by using XYZware Software besides this it supports card slot.

It can only print PLA and the PLA doesn’t smell like melted plastic at all. With one roll of Davinci filament, you can actually print a ton of stuff as you required. The printing speed is faster than others and you can also have the control over the speed.

The printer has gone through various tests by the manufacturers to ensure that the printer is heavy Metal-free and eco-friendly to ensure a quiet printing. There is a big community of users and designers where you can find a lot of 3D example model free download.

XYZprinting Da Vinci Jr. 3D Printer

It has a built-in laser scanner and optional laser engraver add-on module that allow you to scan and print any 3D module in just one device.

With this printer, you cannot print large 3D design. Its print-platform is very slippery and so sometimes stuffs actually slide away. For this, you have to use glue on the platform while printing. After using a couple of months, you can find some technical problem in it, so proper cleaning is required daily.

3. LulzBot Mini Desktop 3D Printer

LulzBot Mini Desktop 3D Printer uses HIPS, PLA, and nGen filaments that make it easy to get a great looking printing with good durability and colorful. They are perfect for making any prototype or model to decorate your home.

This mini 3D printer is a great solution to have an industry standard in your home and it can print with ABS, Nylon, Polycarbonate, and Polyester filaments. These materials are well known for their strength and chemical and they are also high-temperature resistance. The printer has a perfect diameter nozzle that will make your printing sharper and detailed.

This printer is featured by open source software. That means you can customize and improve the performance and ability. It has auto-bed leveling and auto-nozzle cleaning feature that will ensure the perfect printing and it needs low maintenance that will also add a great advantage to your work.

The printer is so accurate in every layer of the printing. It is perfect for small and medium model printing. You need not any extra glue in the heated bed. The glass bed becomes sticky when heated and easy to remove after printing is finished.

LulzBot Mini Desktop 3D Printer

The print bed is small that sometimes it may not be enough for you. It must need a computer to operate. The printer has no cover. As it is extremely heated, you will be burned if you are too close to the printer while printing. You and everyone should keep a safe distance even after sometimes the printing is finished.

4. Comgrow Creality Ender 3 3D Printer Aluminum DIY with Resume Print

Comgrow Creality Ender 3 3D Printer Aluminum DIY with Resume Print is a modern technology 3D printer with resuming feature. You can pause printing anytime and resume it with perfection. It works perfectly even if the power is cut off during the process.

It is an open printer, that means it has no cover in its body. The printer is a product of different parts and you need to assemble its parts. It is an easy process and in case of any problem, it allows to change only that part of the printer by de-assembling that portion.

The printer has the advanced Technology that reduces the plugging risk and also bad extrusion. The wheels are placed technically such that ensure it move noiseless, smoothly and durable to have the best print.

It has safety protected power supply method and it needs a very little time for heating up the bed to start the printing. It also cools down fast after printing to protect the machine.

Comegrow Creality Ender 3 3D Printer Aluminum DIY with Resume Print

In the printer, the build plate where your design will be printed is extremely warped and are not mounted well. So, you may face destruction during printing. Upright alignment of the bed is also not up to the mark. Fans that are used to cool the machine and bed sometimes fail due to excessive heat.

5. Monoprice Select Mini 3D Printer V2

Monoprice Select Mini 3D Printer V2Monoprice Select Mini 3D Printer V2 is fully assembled and has already been calibrated at the factory. It is a complete package having insulated and heated built plate in the bottom. There are nozzle cooling fan and mainboard cooling fan installed to cool down the parts. It is metal constructed as well as it has 32bit Processor, one heated bed etc.

The printer’s heated build plate and a wide range of extruder temperatures will allow you to work with any type of filament. The printer can print with almost all basic filaments, such as ABS and PLA or even conductive PLA, wood and metal composites, or dissolvable PVA.

This will give you the flexibility to choose filament according to your need. Easy to load PLA filament and so there is a filament holder. It’s a low-cost printer for the beginners and you can easily control it.

You can use open source software like Cora or Repeater in this printer. It has WIFI, MicroSD and USB connectivity. It has easy navigation control, intuitive menus, small footprint, bed leveling hex wrench.

Monoprice Select Mini 3D Printer V2

It takes more time for printing stuff. The bed takes time for heat up. After using it for a couple of months, the bed may stop heating. It vibrates during travel moves and make noises but does not seem to affect the print.


Before buying a product there will arise a lot of question in your mind. Here we answered some of the FAQs that may you want to know before buying the best 3D printer.

  1. What things can I print with a 3D printer?

Ans: You can print any kind of 3D design by a 3D printer. Todays from any small miniatures to big houses are being printed by this machine. Even some 3D printers are itself printed by a 3D printer. The scientist is trying to print human organs also.

  1. Are the printed products durable?

Ans: Yes, these products are durable. In most cases, they depend on the quality of the filaments that are used in the printer.

  1. What can I use as the raw material for a 3D printer?

Ans: A special kind of plastics that are called filament are used to print any model. There is a different type of filament of different quality. You must know which kind of filament is supported by your printer.

  1. How much time does it take to print a model?

Ans: normally it takes 4-6 hours in average to print a standard size for the model. It depends on the model size and nozzle diameter of the printer.

  1. Can I print a model colorful?

Ans: Yes, you can use a colorful filament to have colorful printing.

Summing UP

In this era, almost every possible thing is trying to make with the help of a 3D printer. So, whether you are a professional or just a fancy people, it’s time to print your model with a 3D printer to have the best product and to keep your product in the race.

Before buying the printer, considers these facts and factors. Do printing in the proper way with the best 3D printer and make your product more perfect, sharper and detailed.

Also read: Guidelines in Looking for and Obtaining the Right Car Covers


Please enter your comment!
Please enter your name here